Custom Handcrafted Mics

Resonator B

Resonator B-vector

$275.00



FEATURES

  • Passive magnetic moving coil transducer
  • Tuned ported baffled resonant chamber
  • High quality Switchcraft 3 pin XLR connector
  • Rugged copper housing and components
  • Handcrafted in the U.S.A
  • Lifetime operational warranty
  • Adjustable aircraft aluminum mounting bracket to fit North American style stands (will fit European style stands with common threaded adapter)

SPECS

  • Type: Dynamic
  • Polar Pattern: Cardioid
  • Frequency Response: 115Hz – 10kHz
  • Impedance: 150 ohms
  • Output: 119 +/- 2dB SPL @ 1 kHz
  • Dimensions: 2.25 inch x 6 inch
  • Weight: 1.75 lbs.

SOUND SAMPLES

All samples have been recorded with a Shure sm58 for A/B comparisons. Samples with the sm58 always appear first in the sequence, followed by the same performance through the Resonator B.

FAQ

WHAT DOES THE RESONATOR-B SOUND LIKE AND WHAT MAKES IT DIFFERENT FROM ANY OTHER MICROPHONE?
The Resonator-B, unlike full range high fidelity microphones, operates within a limited bandwidth of frequencies which lends a compelling resonant, music box like quality to the signal. Some might compare the sound to an old Victrola or gramophone (please listen to the sound samples provided). The sound is achieved through a combination of the microphone’s element and a mechanical filtering device. The element is specially loaded into a resonant baffled chamber and as sound passes through the chamber, upper mid range frequencies are accentuated while low and high frequencies are reduced.
DOES THE RESONATOR-B COME WITH A MOUNTING SYSTEM AND HOW DO I ATTACH IT TO A MIC STAND?
Yes the Resonator-B comes with a rugged adjustable aircraft aluminum mounting bracket that can be attached to any standard North American mic stand (5/8 inch). If you have a European style mic stand (3/8 inch), the Resonator-B can be attached with a threaded adapter insert (see here). This type of insert is not provided with the Resonator-B but can be easily obtained at your local music store for a nominal cost.

Installation is done by simply screwing the Resonator-B and its bracket onto the mic stand. A few words of caution – do not over tighten the bracket on the stand as damage to the mounting bracket can result.

DOES THE RESONATOR-B USE PHANTOM POWER AND WHAT SORT OF CONNECTION DOES IT REQUIRE?
The Resonator-B does not use phantom power as it has a passive dynamic element. It uses a Switchcraft 3 pin male XLR connector and can be connected to any audio gear with a 3 pin female XLR connector via an XLR cable. Accidentally applying phantom power will not harm the microphone or affect its performance.
CAN THE RESONATOR-B BE USED IN THE STUDIO?
Certainly. Because the sound of Resonator-B has a character unlike many other traditional mics, it makes a great addition to any recording enthusiast’s arsenal of microphones. It can be used as an all out obvious ‘effect’ on it’s own or it can be paired with other traditional microphones for infinite blending possibilities.
CAN THE RESONATOR-B BE USED LIVE? WHAT ABOUT FEEDBACK?
Yes it can be used live. As with any microphone, feedback can be an issue. Results will vary depending on the application, the overall volume of your band, the quality of the sound system and the experience of the engineer running the sound system. However very careful adjustment and equalization of the Resonator-B in the monitors can yield acceptable results. If you use an in ear monitor system, potential feedback problems are usually not an issue.
IS THE RESONATOR-B OR ITS DIAPHRAGM FRAGILE? WILL IT STOP WORKING IF IT IS DROPPED OR MISHANDLED?
It should not. The Resonator-B is constructed from quality rugged materials and is likely to withstand a high degree of shock or other physical impacts. The Resonator-B can also withstand extremely high sound pressure levels without damage to the diaphragm. However a high SPL is likely to overdrive the diaphragm resulting in a clipping style distortion that may be desired for some applications.
DOES THE RESONATOR-B REALLY COME WITH A LIFETIME OPERATIONAL WARRANTY?
Yes and the warranty covers any part of the microphone’s operational performance. The warranty does not cover general wear and tear on the cosmetics of the microphone. If for any reason your Resonator-B stops working or seems to be working improperly please contact us and let us know the problem. If a repair is required please ship your mic to us and we will fix it free of charge.
I WOULD LIKE TO PURCHASE A PLACID AUDIO PRODUCT. WHAT PAYMENT METHODS ARE ACCEPTED?
The easiest form of payment can be done safely and securely through Placid Audio’s shopping cart feature using a credit or debit card.
I DON'T HAVE A CREDIT/DEBIT CARD. I WOULD PREFER TO PAY WITH PAYPAL, CASH OR CHECK/MONEY ORDER. CAN I STILL PURCHASE A PLACID AUDIO PRODUCT THIS WAY?
Yes. Please contact us and let us know what products you wish to order and what form of alternative payment you wish to make. We will get right back to with details on where to send your payment.

Home of the Original Copperphone™ Custom Lo-Fi Microphones for Audiophiles and Recording Studios

Sitemap

© 2018 Placid Audio, All Rights Reserved